Framing Nailer
Full Round Head SN902XP
Unique Features of the SN902XP
Low Profile Design –
Easily fits between studs & joists
Cap Exhaust –
Directs exhaust downward
Aluminum Housing – 
Lightweight, superior durability
Uses Up to 15% Less AIr –
Highly efficient internal design, runs great with 1/4” line fittings
Thumbwheel Adjustable
Depth-of-Drive –
Drives nails to a consistent and controllable depth
Aggressive Toenail Safety –
Teeth grip studs with real bite for precise positioning
Full Comfort Grip –
Resilient grip reduces fatigue
Rear Two-Step Loading –
Quick and easy for right or left handers
Contact or Sequential Trigger Actuation Switch – Patented drive selector*
Patented TrueDriveTM Magazine –
Reduced jams and mis-feeds
*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger fire) operates in the following a sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work surface before starting the sequence again. This trigger is recommended and acceptable for most applications.
Contact Actuation (also known as dual action, bounce or bottom fire) operates in the following sequence- pull the trigger first and keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element at the nose of the tool against the work surface where the fastener is to be driven. This trigger is recommended for use by trained professionals only in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to ensure proper use and safety precautions. For additional information on trigger systems and how SENCO will save you time, reduce costs, and increase quality, call our
©2008 Senco Products, Inc. | www.senco.com | ® |
|
