Canon V3 Information Displayed on the LCD Monitor Shooting Mode, Replay Mode on the mode switch

30

Basic Functions

Replay Mode ( on the mode switch)

• The LCD monitor will turn on when the

mode switch is set to the position.

•In replay mode, pressing the button cycles the information view mode each time the button is pressed.

Single Image Replay (p. 74)

Standard	▼ Detailed	▼ No Display
▼
Multi Image Replay (9 Images) (p. 76)
Standard	▼ ▼ No Display

Information Displayed on the LCD Monitor

Shooting Mode

In shooting mode, information about the current settings and remaining image capacity will display on the LCD monitor for approximately six seconds when the actions below are taken, regardless of whether the LCD monitor is set to On or Off.

•The power is turned on.

• The , , /, / or button ( mode) is pressed.

•The camera settings are changed.

•The Set up menu is closed.

While this information is displayed, you may set the flash, continuous mode, self-timer, macro and infinity settings.

•After you press the shutter button and take a shot, the recorded image appears on the LCD monitor for 2 - 10 seconds (1-second increments). It will continue to display if

you press thebutton while it is shown on the screen. See

Changing the Review Duration (p. 44) .

•While a recorded image is displayed on the LCD monitor, you can check the exposure with the graph (see Histogram, p. 32) that shows the distribution of the brightness data.

(Press thebutton if the histogram and other information is not shown) If the exposure requires adjustment, set the exposure compensation and reshoot.