Downloading Images to a Computer
Copy the CF card’s images to the desired folder on the hard disk.
The images are contained in the [XXXCANON] folder, which is a subfolder of the [DCIM] folder on the CF card. The XXX represents a number from 100 to 998.
• Some computers or memory card readers require the power to be off when the CF card is inserted into the slot. Since this requirement varies between products, please consult the manual for your equipment.
Connecting the Camera to a Computer with a USB Cable
You must install the software and USB driver bundled on the Canon Digital Camera Solution Disk before connecting the camera to the computer. Please refer to the Software Starter Guide for installation instructions.
Use the supplied USB cable to connect the computer’s USB port to the DIGITAL • A / V OUT Terminal on the camera.
USB Port
DIGITAL • A / V
OUT Terminal
2 | 1 |
USB Cable |
|
1Slip a fingernail under the upper edge of the terminal cover to open it.
2 Insert the connector with the ▲ symbols on the camera and cable aligned.
•You do not need to shut off the camera or computer to attach or detach USB interface cables.
•Please refer to your computer’s manual for the locations of the computer’s USB ports.
Set the camera’s mode switch to the 
position.
The LCD monitor will turn on in replay mode and then blank out when the connection to the computer is complete.
