Canon V3 manual Setting the White Balance, White 3-wavelength fluorescent lighting

Shooting

Setting the White Balance

When the white balance mode is set to match the light source, the camera reproduces colors more accurately.

Auto	The camera sets the white balance automatically
	according to shooting conditions.
Daylight	For recording outdoors on a bright day.
Cloudy	For recording under overcast, shady or twilight skies.
Tungsten	For recording under tungsten and bulb-type 3-
	wavelength fluorescent lighting.
Fluorescent	For recording under warm-white, cool-white or warm-
	white (3-wavelength) fluorescent lighting.
Fluorescent H	For recording under daylight fluorescent, or daylight
	fluorescent-type 3-wavelength fluorescent lighting.
Custom	For setting a custom value with a white sheet of paper, etc.,
	to obtain the optimal white balance for the conditions.

• Press the button repeatedly until the White Balance Settings menu displays.

•Use the or button to select a setting. (See the next page for .)

•You can confirm the effect of the setting in the LCD monitor when the LCD monitor is on.

•A shot can be taken immediately after.

The menu will reappear after the shot, allowing you to further adjust the setting.

• This setting cannot be adjusted when the(Sepia) or (B/W) photo effects are selected.

67