Canon V3 manual Setting the Communication Mode, 116, Use the or button to select Normal or PTP

116

Downloading Images to a Computer

• Setting the Communication Mode

Sets the communication mode when downloading images with a camera connected to the computer.

Normal (Default)	Usual setting. You must install the USB driver
	bundled on the Canon Digital Camera Solution
	Disk before using this mode.
	The following functions are available even if the
	software and USB driver bundled on the Canon
	Digital Camera Solution Disk have not been installed.
	- Viewing the camera's images
PTP (Picture Transfer Protocol)	- Downloading the camera's images to a computer
	- Deleting the camera's images
	These functions are available with Windows XP or
	Mac OS X (10.1)*.
	*Select the [Normal] option for all other
	operating systems.

*With any other OS, [PTP] cannot be used. Please select [Normal].

Check that the camera is not connected to the computer.

In the (Set up) menu,

select .

•See Selecting Menus and Settings (p. 37)

•Use the or button to select [Normal] or [PTP].