Quick Start Guide
MODEL PPU916RS
Lenmar PowerPort Laptop Battery – The Ultimate Power On The Go
STEP 1. LOCATING THE REQUIRED VOLTAGE
A
DC
RATING:16V
AC ADAPTER LABEL
B |
RATING:16V |
DC |
BOTTOM OF LAPTOP |
C |
|
VIN: | = 16VDC |
| |
| SIDE OF LAPTOP |
YOU CAN FIND THE REQUIRED DC OUTPUT VOLTAGE ON ONE OF THE THREE OPTIONS SHOWN ABOVE.
STEP 2. VERIFYING CENTER POSITIVE POLARITY
LOOK FOR THE SYMBOL ABOVE IN ANY OF THE THREE LOCATIONS MENTIONED ABOVE. IF THIS SYMBOL DOES NOT MATCH DO NOT USE PPU916RS.
STEP 6. OPERATING THE PPU916RS
DC “OUT” PORT |
|
|
OUTPUT CABLE | OUTPUT TIP | DC “IN” PORT |
PPU916RS |
| |
|
|
CONNECT THE POWER TIP TO THE OUTPUT CABLE AND PLUG IN AS SHOWN ABLOVE.
STEP 3. SETTING THE CORRECT VOLTAGE ON THE PPU916RS
SLIDING BUTTON BETWEEN 16V/19V SELECTION
SLIDE THE SWITH TO MATCH THE REQUIRED VOLTAGE YOU FOUND ON STEP 1.
STEP 4. LOCATING THE CORRECT ADAPTER TIPS
L01D | L51D | L52D | L53D | L54D | L55D | L61D | L62D | L01 | L51 | L53 | L54 | L55 | L61 | L62 |
CHARGING TIP
POWER TIP
VERIFY THE CORRECT ADAPTER TIPS NEEDED FOR YOUR LAPTOP BY VISITING WWW.LENMAR.COM/ADAPTERTIPS.
STEP 7. CAPACITY INDICATOR
LED
BUTTON 1 2 345
LED 1 indicates 0% to 25%
LED 2 indicates 25% to 50%
LED 3 indicates 40% to 60%
LED 4 indicates 75% to 100%
PPU916RS
PRESS THE BUTTON ON THE TOP OF THE PPU916RS TO SHOW REMAINING CAPACITY, THERE ARE 4 INDICATOR LIGHTS.
CHARGING INDICATOR
CAPACITY INDICATOR
STEP 5. CHARGING THE PPU916RS
CHARGE TIP
PPU916RS
ORIGINAL NOTEBOOK AC ADAPTER
STEP 8. USB POWER PORT
USB PORT
THE PPU916RS HAS A BUILT IN USB PORT FOR THE CONVENIENCE OF CHARGING YOUR CELL PHONE, PDA, MP3 PLAYER OR ANY OTHER DEVICE THAT CAN BE CHARGED FROM A STANDARD USB PORT. FOR BEST RESULTS USE AN OEM OR FACTORY APPROVED USB CABLE. NOTE: THIS IS NOT COMPATIBLE WITH TABLETS.
USING YOUR LAPTOP’S ORIGINAL AC ADAPTER, PLUG THE CHARGING TIP FOUND IN STEP 4 INTO YOUR AC ADAPTER, THEN PLUG INTO THE “IN” PORT OF THE PPU916RS.
NOTE: FOR MORE SPECIFIC DETAILED INSTRUCTIONS PLEASE REFER TO THE COMPLETE OWNER’S MANUAL.
