Cisco Systems WSC2960X48TDL Configuring Power Policing, power inline consumption wattage, Purpose

Configuring PoE

Configuring Power Policing

	Command or Action	Purpose
Step 2	no cdp run	(Optional) Disables CDP.
	Example:
	Switch(config)# no cdp run
Step 3	interface interface-id	Specifies the physical port to be configured, and enter
		interface configuration mode.
	Example:
	Switch(config)# interface gigabitethernet2/0/1

Step 4 power inline consumption wattage

Example:

Switch(config-if)# power inline consumption 5000

Step 5 end

Example:

Switch(config-if)# end

Configures the power consumption of a powered device connected to a PoE port on the switch.

The range for each device is 4000 to 30000 mW (PoE+). The default is 30000 mW.

Returns to privileged EXEC mode.

Step 6 show power inline consumption Displays the power consumption data.

Example:

Switch# show power inline consumption

Configuring Power Policing

By default, the switch monitors the real-time power consumption of connected powered devices. You can configure the switch to police the power usage. By default, policing is disabled.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 85