Cisco Systems WSC2960X48TDL Budgeting Power to a Specific PoE Port, Configure terminal No cdp run

Configuring PoE

Budgeting Power for Devices Connected to a PoE Port

	Command or Action
Step 3	power inline consumption default wattage

Example:

Switch(config)# power inline consumption default 5000

Step 4 end

Example:

Switch(config)# end

Purpose

Configures the power consumption of powered devices connected to each the PoE port on the switch.

The range for each device is 4000 to 30000 mW (PoE+). The default is 30000 mW.

Note When you use this command, we recommend you also enable power policing.

Returns to privileged EXEC mode.

Step 5 show power inline consumption default Displays the power consumption status.

Example:

Switch# show power inline consumption default

Budgeting Power to a Specific PoE Port

Perform this task to configure the amount of power budgeted to a powered device connected to a specific PoE port:

SUMMARY STEPS

1.configure terminal

2.no cdp run

3.interface interface-id

4.power inline consumption wattage

5.end

6.show power inline consumption

DETAILED STEPS

	Command or Action	Purpose
Step 1	configure terminal	Enters global configuration mode.
	Example:
	Switch# configure terminal

	Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX
84	OL-29034-01