Cisco Systems WSC2960X48TDL Clearing and Resetting Interfaces and Counters, show version, Command

Configuring Interface Characteristics

Clearing and Resetting Interfaces and Counters

Command	Purpose
show interfaces [interface-id]description	Displays the description configured on an interface
	or all interfaces and the interface status.
show ip interface [interface-id]	Displays the usability status of all interfaces
	configured for IP routing or the specified interface.
show interface [interface-id]stats	Displays the input and output packets by the switching
	path for the interface.
show interfaces interface-id	(Optional) Displays speed and duplex on the interface.
show interfaces transceiver dom-supported-list	(Optional) Displays Digital Optical Monitoring
	(DOM) status on the connect SFP modules.
show interfaces transceiver properties	(Optional) Displays temperature, voltage, or amount
	of current on the interface.
show interfaces [interface-id] [{transceiver	Displays physical and operational status about an SFP
properties detail}] module number]	module.
show running-config interface [interface-id]	Displays the running configuration in RAM for the
	interface.
show version	Displays the hardware configuration, software
	version, the names and sources of configuration files,
	and the boot images.
show controllers ethernet-controller interface-id	Displays the operational state of the auto-MDIX
phy	feature on the interface.

Clearing and Resetting Interfaces and Counters

Table 6: Clear Commands for Interfaces
Command	Purpose
clear counters [interface-id]	Clears interface counters.
clear interface interface-id	Resets the hardware logic on an interface.
clear line [number console 0 vty number]	Resets the hardware logic on an asynchronous serial
	line.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 35