Panasonic AW-RP50N Setting and operating the preset memories,  Memo , Preset number Number

The camera angle to be registered is determined by operating the PAN/TILT lever and ZOOM button.

If necessary, adjust the focus and iris as well.

3 Press the STORE button.

4 After pressing the PAGE button, press the

PRESET MEMORY/MENU button to specify the “Page number” to be registered.

In this step, the “Page number” to be registered as the preset memory is specified.

 For details on the relationship between the “Preset number”, “Page number” and “Number on the page”, refer to the section entitled <Preset numbers and registered pages>.

5 Hold down the PRESET MEMORY/MENU button to specify the “Number on the page”.

The preset memory data is registered at the same time as the “Number on the page” is specified.

Note

When specifying the “Number on the page”, hold down the PRESET MEMORY/MENU button.

Output the images to be shot by the camera to the monitor.

2

Press one of the CAMERA STATUS/SELECTION buttons 1 to 5 to select the remote camera to be operated.

1

Note

The number of position and setting data which can be registered as preset memory data differ from one remote camera to another.

For further details, check the Operating Instructions of the model concerned.

Registering data in the preset memories

Setting and operating the preset memories

This unit is provided with a function for registering the positions to be shot by the remote cameras and the settings of the remote cameras in the remote cameras themselves. Up to 100 sets of data (presets) can be registered in these memories.

The positions and settings listed below can be registered.

 Pan/tilt positions	 Lens iris settings
 Zoom positions	(manual iris only)
 Focus positions	 White balance mode
	settings

3	4			4, 5
		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU
		1	2	3	4	5
IRIS	AUTO		CAMERA STATUS / SELECTION					PT ACTIVE
				1

To register more data, repeat steps 2 to 5.

 When specifying a different “Number on the page” on the same “Page number”, it is registered by skipping step 4 and carrying out the operation in step 5 only.

 The PRESET MEMORY/MENU button corresponding to the preset number lights when preset memory data has been registered in the AW-HE50.

<Preset numbers and registered pages>

Preset number	Page number	Number on the page
1 to 10	1	1 to 10
11 to 20	2	1 to 10
21 to 30	3	1 to 10
31 to 40	4	1 to 10
41 to 50	5	1 to 10
51 to 60	6	1 to 10
61 to 70	7	1 to 10
71 to 80	8	1 to 10
81 to 90	9	1 to 10
91 to 100	10	1 to 10

 Memo 

Example: When specifying preset 21

Press the following buttons in the order given:

PAGE button  PRESET MEMORY/MENU 3 button  PRESET MEMORY/MENU button 1.

6