Selecting the settings for a selected remote camera
Setting the white balance
The ratio between RGB (three primary colors) is adjusted so that white will be reproduced accurately.
If the white balance is off, not only will white be reproduced poorly but the color tone of the entire picture will also deteriorate.
The white balance must be adjusted when using a remote camera for the first time or when the remote camera has not been used for a prolonged period of time. It must also be adjusted when changes have been made in the lighting conditions or brightness.
The white balance can be adjusted automatically or manually (fine adjustment after automatic adjustment). In addition, preset values or the “auto tracking white adjustment (ATW)” which continues to adjust the white balance automatically all the time can be selected. The results of white balance adjustments can be stored
in memory A or memory B when “AWB A” or “AWB B” has been selected for the white balance.
Selecting the white balance mode
Follow the steps below to set the white balance mode.
1 Set the MENU button to ON.
Press the MENU button to light its indicator.
2 Set the PRESET MEMORY/MENU 4 button (AWB/ABB) to ON.
When the button is pressed and its indicator lights, the [AWB/ABB] menu is displayed on the LCD panel.
3 Turn the F1 dial to select the white balance mode.
AWB MOD: AWB B
SET : AWB
The modes which can be selected differ depending on the remote camera connected.
Remote | Mode | Remote camera status | |
camera | |||
|
| ||
|
|
| |
|
| The status of the white balance | |
| AWB A | registered in remote camera | |
|
| memory A is established. | |
|
|
| |
|
| The status of the white balance | |
| AWB B | registered in remote camera | |
| memory B is established. | ||
|
| ||
| In this mode, the white balance is | ||
|
| ||
|
| automatically adjusted continuously | |
| ATW | all the time and automatically | |
| compensated even when the light | ||
|
| ||
|
| source or color temperature has | |
|
| changed. | |
|
|
| |
|
| The status of the white balance | |
| AWB A | registered in remote camera | |
|
| memory A is established. | |
|
|
| |
|
| The status of the white balance | |
| AWB B | registered in remote camera | |
|
| memory B is established. | |
|
|
| |
| The status of the white balance | ||
3200K | which was adjusted at a brightness | ||
| of 3200K is established. | ||
|
| ||
| The status of the white balance | ||
| |||
5600K | which was adjusted at a brightness | ||
| of 5600K is established. | ||
|
| ||
|
|
| |
|
| In this mode, the white balance is | |
|
| automatically adjusted continuously | |
| ATW | all the time and automatically | |
| compensated even when the light | ||
|
| ||
|
| source or color temperature has | |
|
| changed. | |
|
|
| |
| | ||
|
| ||
|
|
|
9