Setting the functions
Controlling the peripheral devices connected to the remote cameras
When any of the peripheral devices listed below are connected to the remote cameras, they can be controlled.
• ND filter | • Wiper |
• AC adapter | • Heater, fan |
• Halogen lamp | |
• Defroster |
|
Control is exercised using the FUNCTION item of the [SETUP] menu.
[6]FUNCTION
Controlling an ND filter
This item is used to control the ND filter when using a lens with an ND filter function on the currently selected remote camera.
From the [SETUP] menu, select [FUNCTION] and display [ND FILTER]. Then select ND filter control.
1.ND FILTER Off
Controlling an AC adapter (AW-PS300A)
This item is used to control shorting and releasing of the OPTION SW CONTROL OUT connector when using an AC adapter
From the [SETUP] menu, select [FUNCTION] and display [OPTION]. Then select shorting or releasing.
2.OPTION Off
Controlling a defroster
This item is used to control a defroster when using a remote camera
From the [SETUP] menu, select [FUNCTION] and display [DEFROSTER]. Then select defroster On or Off.
3.DEFROSTER Off
Controlling a wiper
This item is used to control a wiper when using a remote camera
From the [SETUP] menu, select [FUNCTION] and display [WIPER]. Then select wiper On or Off.
4.WIPER Off
Controlling a heater/fan
This item is used to control a heater/fan when using a remote camera
From the [SETUP] menu, select [FUNCTION] and display [HEATER/FAN]. Then select heater/fan On or Off.
5.HEATER/FAN Off
Controlling a halogen lamp
This item is used to control the lighting (On) and extinguishing (Off) of the halogen lamp when a halogen lamp has been connected to the currently selected remote camera.
From the [SETUP] menu, select [FUNCTION] and display [LAMP]. Then select halogen lamp lighting (On) and extinguishing (Off).
6.LAMP▲ Off
24