Selecting the settings for a selected remote camera
Manually adjusting the white balance (Setting the R and B gain values)
1 As with the automatic adjustment, fill the screen with a white subject.
2 Connect a waveform monitor or color monitor to the video output connector on the currently selected remote camera.
3 Set the MENU button to ON.
Press the MENU button to light its indicator.
4 Set the PRESET MEMORY/MENU 2 button (R/BGAIN) to ON.
When the button is pressed and its indicator lights, the [R/BGAIN] menu is displayed on the LCD panel.
5 Turn the F1 dial to select the R gain setting; similarly, turn the F2 dial to select the B gain setting.
RGAIN | : | ±0 | F1 dial |
BGAIN | : | ±0 | F2 dial |
Note
The settings will differ depending on the remote camera connected.
For further details, check the Operating Instructions of the model concerned.
Auto tracking white adjustment (ATW)
This function provides compensation automatically so that the white balance is adjusted even when the light source or color temperature changes during shooting, so that images that appear the least odd (that is, the most natural looking) are produced.
1 Set the MENU button to ON.
Press the MENU button to light its indicator.
2 Set the PRESET MEMORY/MENU 4 button (AWB/ABB) to ON.
When the button is pressed and its indicator lights, the [AWB/ABB] menu is displayed on the LCD panel.
3 Turn the F1 dial to select ATW.
AWB MOD: ATW 
SET : AWB 
If there is no white on the screen, it may not be possible to compensate the white balance properly.
Similarly, under certain light source and color temperature conditions, it may not be possible to compensate the white balance properly.
Note
The settings will differ depending on the remote camera connected.
For further details, check the Operating Instructions of the model concerned.
11
