Panasonic AW-RP50N Table of menu items, Button, Menu item, Control device, Initial value, Setting

Table of menu items

	Button		Menu item		Control device	Initial value	Setting
10	SYSTEM	[1]CAMERA CTL		1.CAM1		NoAsign	Serial, Network, NoAsign
				to
				100.CAM100
		[2]CAM	ASSIGN	1.CAM1		192.168.000.010
				to
				100.CAM100
		[3]SW CTL		1.SW		NoAsign	Network, NoAsign
		[4]SW ASSIGN		1.INPUT1		CAM1
				2.INPUT2		CAM2
				3.INPUT3		CAM3	NoAsign, CAM1 to 100
				4.INPUT4		CAM4
				5.INPUT5		CAM5
		[5]AUTO SET IP		1.AUTO SETUP		RENEW IP ADR	RENEW IP ADR, KEEP IP ADR,
							ALL CLEAR
		[6]NETWORK		1.IP ADDRESS		192.168.000.009
				2.SUBNETMASK		255.255.255.000
				3.GATEWAY		192.168.000.001
				4.MAC ADDRESS			Display only
		[7]CAM	IP ADR	1.IP:CAM1		192.168.000.010
				to		to
				100.IP:CAM100		192.168.000.109
		[8]CAM PORT		1.PORT:CAM1		80	1 to 65535
				to
				100.PORT:100
		[9]SW	IP ADR	1.IP:SW		192.168.000.008
		[10]ALARM		1.POWER			ALARM, No ALARM
				2.CAM (Note)
				3.CAM (Note)			FAN ALM, P/T ALM,
				4.CAM (Note)			FAN ALM+P/T ALM,
				5.CAM (Note)			No ALARM
				6.CAM (Note)
		[11]INITIALIZE		1.INITIALIZE			ALL, SETUP
		[12]VERSION		1.SYSTEM VER			V...
				2.PROGRAM VER			V.
				3.FPGA VER			V.

Note: “” is the number of the camera in the selected group of cameras.

47