Manuals / Panasonic / Household Appliance / Home Security System

Panasonic AW-RP50N How to turn the power of the remote cameras on, 1GROUP, 2POWER, Cam Power

Models: AW-RP50N

1 48

Download 48 pages 18.08 Kb

Page 4

How to turn the power of the remote cameras on

How to turn the power of the remote cameras on and off

How to turn the power of the remote cameras on

Follow one of the procedures below to turn on the power of the remote cameras.

 Turning on the power one camera at a time

 Turning on the power of a multiple number of cameras

•Turning on the power of all the cameras

•Turning on the power of the selected group of cameras

Each of these procedures is described in turn below.

Turning on the power one camera at a time

1 Select the remote camera.

When the corresponding CAMERA STATUS/ SELECTION button is held down, the name of the remote camera is displayed on the top line of the LCD panel and POWER OFF is displayed on the bottom line.

2 Turn the F2 dial to select “ON”, and press the

F2 dial.

The power of the selected remote camera is turned on.

							2
			CAM100<AW-HE50 >			F1
				POWER: ON		F2
POWER	ALARM						F1	CAMERA
								OSD
		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU
		1	2	3	4	5
IRIS	AUTO		CAMERA STATUS / SELECTION					PT ACTIVE
			CAMERA STATUS / SELECTION

1

Turning on the power of a multiple number of cameras

1 Set the MENU button to ON.

Press the MENU button to light its indicator.

2 Set PRESET MEMORY/MENU 8 button (CAMERA) to ON.

When the button is pressed and its indicator is lighted, the [CAMERA] menu is displayed on the LCD panel.

[1]GROUP ▼

3 Turn the F1 dial to display the [POWER] menu, and press the F1 dial.

[2]POWER

Press the F1 dial.

1.CAM POWER

▼

ALL OFF

Turning on the power of all the cameras

4 Turn the F2 dial to select “ALL ON”, and press the F2 dial.

1.CAM POWER

▼

ALL ON

The power of all the remote cameras is now turned on.

Turning on the power of the selected group of cameras

4 Turn the F2 dial to select “GROUP ON”, and press the F2 dial.

1.CAM POWER

▼

GROUP ON

The power of the selected group of remote cameras is turned on.

4

Image 4

Panasonic AW-RP50N How to turn the power of the remote cameras on, Turning on the power one camera at a time, 1GROUP

Contents

Operations and Settings Operating InstructionsRemote Camera Controller Model No. AW-RP50NContents Disclaimer of warranty Before useOverview Trademarks and registered trademarksHow to turn the power of the remote cameras on Turning on the power one camera at a time2POWER 1.CAM POWERHow to turn the power of the remote cameras off Turning off the power one camera at a time2POWER 1.CAM POWERSetting and operating the preset memories Preset numbers and registered pagesDeleting the preset memory data Executing the preset dataSetting and operating the preset memories Setting the gain Setting the pedestalGAIN GAINSetting the white balance Automatically adjusting the white balance  Memo 1 Set the MENU button to ON 4 Turn the F2 dial to select AWB, and press the3 Set the MENU button to ON Setting the black balance Automatically adjusting the black balanceAWB MOD AWB B SET ABB RPEDSetting the shutter speed Setting the detailSHUTTER StepSetting the shooting mode Specifying the color bars1 Set the MENU button to ON 3 Turn the F1 dial to select the shooting modeTable of operations Remote cameraMenu ON/OFF Dial operationSetting the USER buttons Registering functions in the USER buttons1USER 1.USER1Tally settings Setting the functions 1USER4OPERATE 1.PAN DIRSetting the remote camera operations Setting the functionsSetting the panning direction Setting the tilting directionSetting the functions 5.SPEED WITHZ Off7.FOCUS/IRIS STANDARD 6.SPEED TARGET P/T/Z/FSetting the functions 1.DIAG SPEED3.HOMEPOSITION SET 2.SCOPE MODE ASetting the functions Display that appears with the AW-HE502.LIMIT UP Off 2.LIMIT UP OnSetting the functions Display that appears with the AW-HE50Display that appears with the AW-HE50 4.LIMIT LEFTOffSetting the functions 6FUNCTIONControlling an ND filter 1.ND FILTEROffAdjusting the minimum lens zoom start speed Setting the functionsSetting the preset numbers 1.PRESET CTL1 CAM100 PRE100Adjusting the LCD panel backlight Locking the button operationsSetting the functions Setting button operation enable or disableSetting linkup with the switcher Switcher network settingsLink setting Setting linkup with the switcherSetting the image output and image input Switcher settings Bus setting Camera information settingFocus assist setting 3.BUS AUXOA tally setting PAN/TILT lever control setting6.TALLY IP Off 7.P/T LEVERSetting all the information displays togetherRemote camera alarm information 9.ALARM OffVideo format 2.FORMATOffChecking the equipment alarm information 10ALARM1.POWER No ALARM 1.POWER No ALARMReturning the unit to its factory status 1.INITIALIZE SETUPSETUP 1CAMERA CTLControl interface for external devices TALLY/GPID-sub 15-pin,female, inch thread Example of GPI OUT connectionsInstalling the software Setup SoftwareIP settings Setup Software Displaying the “Setting” tabSetup Software Auto IP settingChanging the IP addresses Changing the camera numbersSaving and loading data Setup SoftwareLoading the setting files Saving the setting filesReferencing the network environment Setup SoftwareTable of menu items SettingButton Menu itemSetting Table of menu itemsButton Menu itemSetting Table of menu itemsButton Menu itemSetting Table of menu itemsButton Menu itemSetting Table of menu itemsButton Menu itemF0610Y1070 D