Manuals / Panasonic / Household Appliance / Home Security System

Panasonic AW-RP50N Checking the equipment alarm information, 1CAMERA CTL, 10ALARM, POWER No ALARM

Models: AW-RP50N

1 48

Download 48 pages 18.08 Kb

Page 35

Checking the equipment alarm information

Press the MENU button to light its indicator.

Checking the equipment alarm information

It is possible to check the alarm statuses of the unit and the remote cameras assigned to the CAMERA STATUS/ SELECTION buttons.

1 Set the MENU button to ON.

2 Set PRESET MEMORY/MENU 10 button (SYSTEM) to ON.

When the button is pressed and its indicator is lighted, the [SYSTEM] menu is displayed on the LCD panel.

[1]CAMERA CTL ▼

3 Turn the F1 dial to display the ALARM menu, and press the F1 dial.

[10]ALARM

Press the F1 dial.

1.POWER ▼ No ALARM

4 Turn the F1 dial to select the unit (POWER) or remote camera item (CAM1 to CAM100).

The alarm status is displayed underneath.

1.POWER ▼ No ALARM

Turn the F2 dial.

2.CAM1

FAN ALM

[Select POWER]

The unit’s power supply alarm can be checked.

No ALARM:

When the power supply is trouble-free.

ALARM:

When trouble has occurred in the power supply.

[Select CAM1 to CAM100]

The alarm statuses of the remote cameras currently assigned to the CAMERA STATUS/SELECTION buttons are displayed.

No ALARM:

Trouble-free.

FAN ALM:

Trouble has occurred in the cooling fan.

P/T ALM:

Trouble has occurred in the pan/tilt operation.

FAN ALM+P/T ALM:

Trouble has occurred in the cooling fan and pan/tilt operation.

Note

When an alarm has occurred, stop operation immediately, and be absolutely sure to contact your dealer.

Continued use may cause the unit to malfunction.

35

Image 35

Panasonic AW-RP50N Checking the equipment alarm information, 1CAMERA CTL, 10ALARM, POWER No ALARM, 2.CAM1 FAN ALM, Alarm

Contents

Model No. AW-RP50N Operations and SettingsOperating Instructions Remote Camera ControllerContents Trademarks and registered trademarks Disclaimer of warrantyBefore use Overview1.CAM POWER How to turn the power of the remote cameras onTurning on the power one camera at a time 2POWER1.CAM POWER How to turn the power of the remote cameras offTurning off the power one camera at a time 2POWERPreset numbers and registered pages Setting and operating the preset memoriesSetting and operating the preset memories Executing the preset dataDeleting the preset memory data GAIN Setting the gainSetting the pedestal GAINSetting the white balance 4 Turn the F2 dial to select AWB, and press the Automatically adjusting the white balance Memo  1 Set the MENU button to ON3 Set the MENU button to ON RPED Setting the black balanceAutomatically adjusting the black balance AWB MOD AWB B SET ABBStep Setting the shutter speedSetting the detail SHUTTER3 Turn the F1 dial to select the shooting mode Setting the shooting modeSpecifying the color bars 1 Set the MENU button to ONDial operation Table of operationsRemote camera Menu ON/OFF1.USER1 Setting the USER buttonsRegistering functions in the USER buttons 1USERTally settings 1.PAN DIR Setting the functions1USER 4OPERATESetting the tilting direction Setting the remote camera operationsSetting the functions Setting the panning direction6.SPEED TARGET P/T/Z/F Setting the functions5.SPEED WITHZ Off 7.FOCUS/IRIS STANDARD2.SCOPE MODE A Setting the functions1.DIAG SPEED 3.HOMEPOSITION SET2.LIMIT UP On Setting the functionsDisplay that appears with the AW-HE50 2.LIMIT UP Off4.LIMIT LEFTOff Setting the functionsDisplay that appears with the AW-HE50 Display that appears with the AW-HE501.ND FILTEROff Setting the functions6FUNCTION Controlling an ND filter1.PRESET CTL1 CAM100 PRE100 Adjusting the minimum lens zoom start speedSetting the functions Setting the preset numbersSetting button operation enable or disable Adjusting the LCD panel backlightLocking the button operations Setting the functionsSwitcher network settings Setting linkup with the switcherSetting linkup with the switcher Link settingSetting the image output and image input Switcher settings 3.BUS AUX Bus settingCamera information setting Focus assist setting7.P/T LEVER OA tally settingPAN/TILT lever control setting 6.TALLY IP Offtogether Setting all the information displays2.FORMATOff Remote camera alarm information9.ALARM Off Video format1.POWER No ALARM Checking the equipment alarm information10ALARM 1.POWER No ALARM1CAMERA CTL Returning the unit to its factory status1.INITIALIZE SETUP SETUPExample of GPI OUT connections Control interface for external devicesTALLY/GPI D-sub 15-pin,female, inch threadIP settings Setup SoftwareInstalling the software Displaying the “Setting” tab Setup SoftwareChanging the camera numbers Setup SoftwareAuto IP setting Changing the IP addressesSaving the setting files Saving and loading dataSetup Software Loading the setting filesSetup Software Referencing the network environmentMenu item Table of menu itemsSetting ButtonMenu item SettingTable of menu items ButtonMenu item SettingTable of menu items ButtonMenu item SettingTable of menu items ButtonMenu item SettingTable of menu items ButtonF0610Y1070 D