Panasonic AW-RP50N Setting the User buttons, Registering functions User buttons

Setting the USER buttons

Menu items can be assigned to the two USER buttons (USER1, USER2).

The target function can be activated simply by pressing the USER button (USER1 or USER2).

	F1
	F2
POWER ALARM	F1	CAMERA
		OSD

		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU

Menu item	Details of operation performed
SWLINK	This sets the link control	On: Enable
	between the unit and switcher.	Off: Disable
BUSCONT	This is the bus switching	On: Enable
	setting.	Off: Disable
FASIST	This sets the focus assist	On: Enable
	function.	Off: Disable
CAMSEL	This displays icons at the
	bottom left of the images from	On: Display
	the remote camera selected
		Off: Non-display
	by the unit on the multi view
	display of the switcher.
TALLY_IP	This sends the tally information
	sent periodically by UDP from	On: Enable
	the switcher to the remote	Off: Disable
	camera.
CAMINF	This sends the camera
	information of the remote	On: Enable
	camera selected to the	Off: Disable
	switcher.
AWB	AWB is executed when the USER button, in which
	AWB has been assigned, is pressed.
	When AWB is executed successfully, the indicator
	of the button goes off; conversely, when it is not
	executed successfully, it blinks.
ABB	ABB is executed when the USER button, in which
	ABB has been assigned, is pressed.
	When ABB is executed successfully, the indicator
	of the button goes off; conversely, when it is not
	executed successfully, it blinks.
POWER OFF	When the USER button in which POWER OFF
	has been assigned is held down, the indicator of
	the button lights for an instant, and power OFF is
	requested for all the remote cameras connected.

Registering functions in the

USER buttons

1 Set the MENU button to ON.

Press the MENU button to light its indicator.

2 Set the PRESET MEMORY/MENU 9 button (SETUP) to ON.

When the button is pressed and its indicator lights, the [SETUP] menu is displayed on the LCD panel.

	[1]USER	▼
3	Press the F1 dial.
4	Turn the F1 dial to display [USER1] or [USER2].
	1.USER1	▼
		SWLINK

5 Turn the F2 dial to select the item to be assigned, and press the F2 dial.

1.USER1 ▼

SWLINK

Turn the F2 dial, and then press it.

1.USER1 ▼

BUSCONT

16