Manuals / Panasonic / Household Appliance / Home Security System

Panasonic AW-RP50N operating instructions Setup Software, Installing the software, IP settings

Models: AW-RP50N

1 48

Download 48 pages 18.08 Kb

Page 38

Setup Software

Setup Software

The “Setup Software” is an application which enables the same functions as the unit’s automatic IP settings to be executed from the host computer.

This is used to set the network environment for operating the remote camera using the host computer.

It can save the setting data files in the host computer, and it can load the saved files and reflect them in the network environment.

For details, refer to the sections that follow.

Notes

When the settings are to be selected at the host computer using the “Setup Software”:  Do not perform the operation at the unit.

 Do not start up the “Setup Software” in any other computer in the same network.  Do not use the “Easy IP Setup Software” which is provided with the AW-HE50.

Installing the software

This section describes how to install the Setup Software.

1.Insert the CD-ROM provided with the unit into the CD-ROM drive of the host computer in which the software application is going to be installed.

2.Copy the entire folder containing “Setup Software” on the CD-ROM onto the hard disk drive of the host computer.

3.Double-click on “RP50Tool.exe” in the “Setup Software” folder which was copied to start Setup Software.

IP settings

On the “Setting” tab screen, set the IP addresses of the remote cameras and switcher.

38

Image 38

Panasonic AW-RP50N operating instructions Setup Software, Installing the software, IP settings

Contents

Remote Camera Controller Operations and SettingsOperating Instructions Model No. AW-RP50NContents Overview Disclaimer of warrantyBefore use Trademarks and registered trademarks2POWER How to turn the power of the remote cameras onTurning on the power one camera at a time 1.CAM POWER2POWER How to turn the power of the remote cameras offTurning off the power one camera at a time 1.CAM POWERSetting and operating the preset memories Preset numbers and registered pagesSetting and operating the preset memories Executing the preset dataDeleting the preset memory data GAIN Setting the gainSetting the pedestal GAINSetting the white balance 1 Set the MENU button to ON Automatically adjusting the white balance Memo  4 Turn the F2 dial to select AWB, and press the3 Set the MENU button to ON AWB MOD AWB B SET ABB Setting the black balanceAutomatically adjusting the black balance RPEDSHUTTER Setting the shutter speedSetting the detail Step1 Set the MENU button to ON Setting the shooting modeSpecifying the color bars 3 Turn the F1 dial to select the shooting modeMenu ON/OFF Table of operationsRemote camera Dial operation1USER Setting the USER buttonsRegistering functions in the USER buttons 1.USER1Tally settings 4OPERATE Setting the functions1USER 1.PAN DIRSetting the panning direction Setting the remote camera operationsSetting the functions Setting the tilting direction7.FOCUS/IRIS STANDARD Setting the functions5.SPEED WITHZ Off 6.SPEED TARGET P/T/Z/F3.HOMEPOSITION SET Setting the functions1.DIAG SPEED 2.SCOPE MODE A2.LIMIT UP Off Setting the functionsDisplay that appears with the AW-HE50 2.LIMIT UP OnDisplay that appears with the AW-HE50 Setting the functionsDisplay that appears with the AW-HE50 4.LIMIT LEFTOffControlling an ND filter Setting the functions6FUNCTION 1.ND FILTEROffSetting the preset numbers Adjusting the minimum lens zoom start speedSetting the functions 1.PRESET CTL1 CAM100 PRE100Setting the functions Adjusting the LCD panel backlightLocking the button operations Setting button operation enable or disableSetting linkup with the switcher Switcher network settingsLink setting Setting linkup with the switcherSetting the image output and image input Switcher settings Focus assist setting Bus settingCamera information setting 3.BUS AUX6.TALLY IP Off OA tally settingPAN/TILT lever control setting 7.P/T LEVERSetting all the information displays togetherVideo format Remote camera alarm information9.ALARM Off 2.FORMATOff1.POWER No ALARM Checking the equipment alarm information10ALARM 1.POWER No ALARMSETUP Returning the unit to its factory status1.INITIALIZE SETUP 1CAMERA CTLD-sub 15-pin,female, inch thread Control interface for external devicesTALLY/GPI Example of GPI OUT connectionsIP settings Setup SoftwareInstalling the software Setup Software Displaying the “Setting” tabChanging the IP addresses Setup SoftwareAuto IP setting Changing the camera numbersLoading the setting files Saving and loading dataSetup Software Saving the setting filesReferencing the network environment Setup SoftwareButton Table of menu itemsSetting Menu itemButton SettingTable of menu items Menu itemButton SettingTable of menu items Menu itemButton SettingTable of menu items Menu itemButton SettingTable of menu items Menu itemF0610Y1070 D