Panasonic AW-RP50N Executing the preset data, Deleting the preset memory data, PRESET1, PAGE1

Setting and operating the preset memories

Executing the preset data

1 Press one of the CAMERA STATUS/SELECTION buttons 1 to 5 to select the remote camera to be operated.

Select the remote camera which is to be pointed at the camera angle registered in the preset memory.

2 After pressing the PAGE button, press the

PRESET MEMORY/MENU button to specify the registered “Page number” of the preset memory.

In this step, specify the registered “Page number” of the preset memory.

 For details on the relationship between the “Preset number”, “Page number” and “Number on the page”, refer to the section entitled <Preset numbers and registered pages>.

3 Press the PRESET MEMORY/MENU button to specify the “Number on the page”.

The preset memory data is executed at the same time as the “Number on the page” are specified.

	2			2,3
		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU
		1	2	3	4	5
IRIS	AUTO		CAMERA STATUS / SELECTION					PT ACTIVE
				1

 When the preset memory data is executed, the preset number is displayed on the right side of the top level of the LCD panel.

PRESET1

PAGE:1 (1-10)

The preset number display is cleared when the power of the unit or remote camera has been turned off or when the camera group has been switched.

 In the case of the AW-HE50, the corresponding PRESET MEMORY/MENU button will go off, and then it will light again when preset memory data is executed.

In the case of another remote camera connected serially, the corresponding PRESET MEMORY/MENU button will simply just light.

Deleting the preset memory data

Note

This function does not work with the AW-PH400.

1 Press one of the CAMERA STATUS/SELECTION buttons 1 to 5 to select the remote camera to be operated.

Select the remote camera whose preset memory data is to be deleted.

2 Press the DELETE button.

3 After pressing the PAGE button, press the

PRESET MEMORY/MENU button to specify the “Page number” of the preset memory data to be deleted.

In this step, specify the “Page number” of the preset memory data to be deleted.

 For details on the relationship between the “Preset number”, “Page number” and “Number on the page”, refer to the section entitled <Preset numbers and registered pages>.

4 Hold down the PRESET MEMORY/MENU button to specify the “Number on the page”.

The preset memory data is deleted at the same time as the “Number on the page” is specified.

Note

When specifying the “Number on the page”, hold down the PRESET MEMORY/MENU button.

	3			3, 4
		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU
		1	2	3	4	5
IRIS	AUTO		CAMERA STATUS / SELECTION					PT ACTIVE
	2			1

7