Setting the functions
Setting the movement range of the remote camera (limiter function)
This unit has a limiter function which is a function that limits the movement range of the remote cameras.
There are four limiter positions: the upper, lower, left and right limits of the movement range.
When the
Depending on the nature of the
In cases like this, the shooting range of the
When any other remote camera is used:
Depending on the installation position, there may be an obstruction in the movement range, and the remote cameras may come into contact with this obstruction.
If the remote cameras come into contact with an obstruction, trouble or accidents may result.
In cases like this, a limiter can be set in front of the obstruction to prevent contact.
Setting the upper limit
From the [SETUP] menu, select [PTZ ADJ] and display [LIMIT UP]. Then set the upper limit.
The setting that is displayed differs between the
Display that appears with the AW-HE50
The current setting status is displayed in the LIMIT UP item.
2.LIMIT UP Off
Turn the F2 dial, and then press it.
2.LIMIT UP On
Display that appears with other remote cameras
The setting status is displayed after the completion of the setting in the LIMIT UP item.
2.LIMIT UP
EXEC
Press the F2 dial.
2.LIMIT UP
LIMIT ON
Setting the lower limit
From the [SETUP] menu, select [PTZ ADJ] and display [LIMIT DOWN]. Then set the lower limit.
The setting that is displayed differs between the
Display that appears with the
The current setting status is displayed in the LIMIT DOWN item.
3.LIMIT DOWN Off
Turn the F2 dial, and then press it.
3.LIMIT DOWN On
Display that appears with other remote cameras
The setting status is displayed after the completion of the setting in the LIMIT DOWN item.
3.LIMIT DOWN EXEC
Press the F2 dial.
3.LIMIT DOWN LIMIT ON
22