Manuals / Panasonic / Household Appliance / Home Security System

Panasonic AW-RP50N Control interface for external devices, Tally/Gpi, Current, Max. 50 mA

Models: AW-RP50N

1 48

Download 48 pages 18.08 Kb

Page 37

Control interface for external devices

Control interface for external devices

TALLY/GPI

TALLY IN 1 to TALLY IN 5 are contact input ports which are used to light the unit’s tally indicators (above the CAMERA STATUS/SELECTION buttons).

The tally lamps light with contact input.

GPI IN 1 to GPI IN 4 are contact input ports which are used to control the unit from an external source.

GPI OUT 1 to GPI OUT 4 are open output ports which are used to output the statuses to an external source.

(D-sub 15-pin, female, inch thread)

81

159

Pin No.		Signal	Description of signal	Operation

1		TALLY IN 1	CAM1 tally input

	9	TALLY IN 2	CAM2 tally input

2		TALLY IN 3	CAM3 tally input	Contact input

	10	TALLY IN 4	CAM4 tally input

3		TALLY IN 5	CAM5 tally input

	11	GND	Ground

4		GPI IN 1	Preset input 1

	12	GPI IN 2	Preset input 2	Contact input

5		GPI IN 3	Preset input 3
5		GPI IN 3	Preset input 3

	13	GPI IN 4	Panel lock

6		GPI OUT 1	Remote camera selection 0 
	14	GPI OUT 2	Remote camera selection 1 	Open collector output
7		GPI OUT 3	Remote camera selection 2 	Open collector output
7		GPI OUT 3	Remote camera selection 2 
	15	GPI OUT 4	Alarm

8		NC	Not used

Example of GPI OUT connections

Ensure that the conditions given below are satisfied. Dielectric strength: Max. DC 24 V

Current:	Max. 50 mA
AW-RP50	(Max. voltage: 24 V)
AW-RP50
	GPI OUT
	(Max. current: 50 mA)
	LED
	GND

Example of TALLY IN and GPI IN connections

Provide contact inputs.

AW-RP50

+3.3 V

TALLY IN

GPI IN

GND

: The selection statuses (CAMERA STATUS/SELECTION buttons 1 to 5) of the remote cameras can be monitored at GPI OUT 1 to GPI OUT 3.

	CAMERA STATUS/SELECTION	Remote camera	Remote camera	Remote camera
	CAMERA STATUS/SELECTION	selection 0	selection 1	selection 2
	button	selection 0	selection 1	selection 2
	button	(GPI OUT 1)	(GPI OUT 2)	(GPI OUT 3)
		(GPI OUT 1)	(GPI OUT 2)	(GPI OUT 3)

	1	On	Off	Off

	2	Off	On	Off

	3	On	On	Off

	4	Off	Off	On

	5	On	Off	On

37

Image 37

Panasonic AW-RP50N Control interface for external devices, Tally/Gpi, D-sub 15-pin,female, inch thread, Current

Contents

Operating Instructions Operations and SettingsRemote Camera Controller Model No. AW-RP50NContents Before use Disclaimer of warrantyOverview Trademarks and registered trademarksTurning on the power one camera at a time How to turn the power of the remote cameras on2POWER 1.CAM POWERTurning off the power one camera at a time How to turn the power of the remote cameras off2POWER 1.CAM POWERPreset numbers and registered pages Setting and operating the preset memoriesDeleting the preset memory data Executing the preset dataSetting and operating the preset memories Setting the pedestal Setting the gainGAIN GAINSetting the white balance  Memo  Automatically adjusting the white balance1 Set the MENU button to ON 4 Turn the F2 dial to select AWB, and press the3 Set the MENU button to ON Automatically adjusting the black balance Setting the black balanceAWB MOD AWB B SET ABB RPEDSetting the detail Setting the shutter speedSHUTTER StepSpecifying the color bars Setting the shooting mode1 Set the MENU button to ON 3 Turn the F1 dial to select the shooting modeRemote camera Table of operationsMenu ON/OFF Dial operationRegistering functions in the USER buttons Setting the USER buttons1USER 1.USER1Tally settings 1USER Setting the functions4OPERATE 1.PAN DIRSetting the functions Setting the remote camera operationsSetting the panning direction Setting the tilting direction5.SPEED WITHZ Off Setting the functions7.FOCUS/IRIS STANDARD 6.SPEED TARGET P/T/Z/F1.DIAG SPEED Setting the functions3.HOMEPOSITION SET 2.SCOPE MODE ADisplay that appears with the AW-HE50 Setting the functions2.LIMIT UP Off 2.LIMIT UP OnDisplay that appears with the AW-HE50 Setting the functionsDisplay that appears with the AW-HE50 4.LIMIT LEFTOff6FUNCTION Setting the functionsControlling an ND filter 1.ND FILTEROffSetting the functions Adjusting the minimum lens zoom start speedSetting the preset numbers 1.PRESET CTL1 CAM100 PRE100Locking the button operations Adjusting the LCD panel backlightSetting the functions Setting button operation enable or disableSwitcher network settings Setting linkup with the switcherSetting linkup with the switcher Link settingSetting the image output and image input Switcher settings Camera information setting Bus settingFocus assist setting 3.BUS AUXPAN/TILT lever control setting OA tally setting6.TALLY IP Off 7.P/T LEVERtogether Setting all the information displays9.ALARM Off Remote camera alarm informationVideo format 2.FORMATOff10ALARM Checking the equipment alarm information1.POWER No ALARM 1.POWER No ALARM1.INITIALIZE SETUP Returning the unit to its factory statusSETUP 1CAMERA CTLTALLY/GPI Control interface for external devicesD-sub 15-pin,female, inch thread Example of GPI OUT connectionsInstalling the software Setup SoftwareIP settings Displaying the “Setting” tab Setup SoftwareAuto IP setting Setup SoftwareChanging the IP addresses Changing the camera numbersSetup Software Saving and loading dataLoading the setting files Saving the setting filesSetup Software Referencing the network environmentSetting Table of menu itemsButton Menu itemTable of menu items SettingButton Menu itemTable of menu items SettingButton Menu itemTable of menu items SettingButton Menu itemTable of menu items SettingButton Menu itemF0610Y1070 D