IBM TDS400 user manual Error messages

Error messages

Error messages

Error messages	Explanation
Copy too late	The copy is too late at the paperpath output sensor
Remove paper	Remove the print material.
Press <on-line>
Speed failure	A paper jam occurred.
Remove paper	Remove the paper jam and press <on-line>
Press <on-line>
Knife 1 error	An error occurred during the cut of the roll.
Remove paper	Check the paper in the roll unit and remove if necessary.
Press <on-line>	Press <on-line>.
Knife 2 error	An error occurred during the cut of the roll.
Remove paper	Check the paper in the roll unit and remove if necessary.
Press <on-line>	Press <on-line>.
Roll retract err	Print material error when the roll unit takes back the material.
Press <on-line>
Roll init error	A sensor of the roll unit is activated when power is applied to the
Open roll unit	printer.
Press <on-line>	Open the roll unit.
	Guide the paper to the marker (see ‘Feed the material’ on
	page 155.
	Press <on-line>
Input too late	The input sheet is too late.
Open roll unit	Open the roll unit
Press <on-line>	If necessary, withdraw roll and rewind
	Press <on-line>
Deposit error	An error in the compact output stacker occurred.
Press <on-line>	The compact output stacker stops.
	The print process continues.
	Press <on-line>.
Illegal language on	The controller has an illegal language.
controller	The controller uses the English language instead of the selected
using UK English	language.
Press <on-line>	Call service.
	Press <on-line>
Close roll unit	While you printed, the roll unit opened.
Rewind paper	Rewind the paper.
Press <on-line>	Close the roll unit.
	Press <on-line>

44 Océ TDS400 User Manual