Make a scan
To scan an original to file is an easy operation. If the settings (see ‘Settings to scan’ on page 77) are correct, you must press the Start key 
on the scanner operator panel.
▼How to make a scan
1Place your original
2Select the appropriate original type.
3Press the Output key to select ‘File’.
4Select a Destination (see ‘Destinations’ on page 86).
5Press the Start key 
. The original is scanned.
Note: Select
6On the controller, Océ View Station LT starts, to show the result of the scan (see Figure 16).
Using the Océ TDS400 to | 75 |
