[61] Feed the material
9If you have inserted a roll with another material or with a different width, you have to program the correct width and material type (refer to ‘Media type and size on the printer’ on page 29).
If you want to cut the paper to get a straight leading strip refer to ‘Cut media’ on page 32.
Otherwise continue with the next step.
10Close the drawer.
11Press the
▼How to load roll 2
1Open the cover to get access to roll 2 (see Figure 62).
[62] Open the lower paper drawer
2Remove the roll holder (see Figure 63).
Printer Supplies and Maintenance | 155 |