[118] Situation A: No mechanical errorSituation B: Mechanical error |
4If there are, remove the tape strips in the reinforcement unit.
Note: If the protection sheet is not on the reinforcement strip (see situation A in figure 118), there is no mechanical error and you should insert a new tape roll as described in ‘How to insert a new tape roll’ on page 165. If this error frequently occurs you should call Customer Service.
5Remove all tape between the rollers and knives (see Figure 119).
[119] Removing the tape
6Lead a new trailing strip of tape between the rollers and knives. For more information see ‘How to insert a new tape roll’ on page 165.
Troubleshooting | 193 |
