[109] Opening the plate

3Remove any jammed printing material.

4Squeeze the two knobs again and put the plate in its original position.

5Release the green lever in the lower section of the belt unit (by slightly lifting it and pulling it forward) to open the lower plate (see Figure 110).

[110] Opening the lower plate

6Remove any jammed printing material.

7Pull up the green lever again (until it locks into position) to close the plate.

8Close the belt unit door.

9Put the belt in its operating position by pushing it down gently.

188

Océ TDS400 User Manual

Page 188
Image 188
IBM TDS400 user manual 188