IBM user manual Turn on and turn off the Océ TDS400 scanner

You can also do a number of special copy jobs. These special copy jobs include:

■Copy non standard size originals

■Define the copy size

■Define image quality: Optimisation for line/text/photo or blueprint mode

■Background compensation for line/text/photo or blueprint mode

■Edit function: mirror

Turn on and turn off the Océ TDS400 scanner

To turn on the system:

■turn on the scanner.

■turn on the printer (see page 27).

■turn on the controller(see page 28).

When you turn on the system, it is ready for operation. In this state, the machine is in the stand-by mode. There is no need to turn it off after each copy job. You can leave the system turned on for the rest of the day. At all times, the Océ TDS400 is ready to use.

If the system is not in use for more than 1 minute, the operator panel returns automatically to the stand-by mode. The operator panel of the scanner is activated in the following conditions:

■you feed an original

■a key on the operator panel is pressed

▼Turn on the scanner

1Set the ON/OFF switch at the rear of the scanner, to position ‘1’ (see Figure 10). If the power supply is connected, the green switch lights.

[10] On/off switch of the scanner

Using the Océ TDS400 to Copy 53