IBM TDS400 user manual Installation procedure for MS Windows systems

Installation procedure for MS Windows® systems

Before you install Océ Remote Logic®, you must take note of the following minimum system requirements for the remote system. The system must be a Pentium® 233 with 32 Mb RAM running Windows® 95, 98, NT® (service pack

3)Windows® 2000 or Windows® XP, Contact your local Océ organisation for more possible systems.

Océ Remote Logic® (Queue Manager, System Control Panel and Settings Editor) are on the Océ TDS400 CD-ROM and on the Océ Power Logic® Controller CD-ROM provided with the system. The installation procedure for Remote Logic® is quite simple and self-explanatory. When you select the ‘Install remote applications’ option on the CD-ROM, a Wizard starts to guide you through the installation process. When the installation process is complete you do not have to restart your system.

Note: Océ Remote Logic® only works when TCP/IP is enabled on your system. Refer to your system administrator for assistance with the installation procedure for TCP/IP.

▼Install Océ Remote Logic®

1Insert the Océ Remote Logic® CD-ROM or the Océ Power Logic® Controller CD-ROM into the CD-ROM drive of your PC.

2Select the ‘Install remote applications’ option.

The installation Wizard starts, and asks to select a setup language.

[53] Choosing a setup language

Océ Power Logic®: Remote Logic 131