IBM user manual Océ TDS400 options

Refer to ‘Océ Power Logic®: System Control Panel’ on page 115, for complete information about the Océ System Control Panel.

Océ Queue Manager The Océ Queue Manager (QM) application gives a graphical design of the print queue. You can manage jobs in the print queue, history queue, or inbox queue.

Refer to ‘Océ Power Logic®: Queue Manager’ on page 121, for complete information about the Océ Queue Manager.

Océ Remote Logic® enables you to:

■View system status (Océ System Control Panel).

■Manage print jobs (Océ Queue Manager). Change settings (Océ Settings Editor).

Océ TDS400 options

By default, the Océ TDS400 has an automatic 1 roll unit and is equipped with a receiving tray as the output delivery device. The receiving tray is the rack on the bottom of the printer (see figure 1 on page 12).

Automatic 2-roll unit The Océ TDS400 is available with an automatic 2-roll unit. Each of the rolls can be loaded with print material of a different size or type. The size and type of the available media are indicated on the operating panel.

Compact Output Stacker The optional compact output stacker offers a smart and efficient disposition of printed or copied drawings (up to 100 prints) on PPC material and some other materials.

Output Delivery Tray Collects output at the rear of printers as they are printed.

Folder folds the output and adds reinforcement strips with optional reinforcement unit.

Note: you can only use the output delivery tray or the folder.

Introduction 15