7Press the 
key to enter the ‘Legend’ menu.
8Select ‘Trailing’ or ‘Leading’.
▼Set the drawing method
1Press the
2Select ‘Folding’ with the 
or 
key.
3Press the 
key to enter the ‘Folding’ menu.
4Select ‘Input’ with the 
or 
key.
5Press the 
key to enter the ‘Input’ menu.
6Select ‘Method’ with the 
or 
key.
7Press the 
key to enter the ‘Method’ menu.
8Select ‘Standard’, ‘Afnor’ or ‘Ericsson’.
▼Set the binding method
1Press the
2Select ‘Folding’ with the 
or 
key.
3Press the 
key to enter the ‘Folding’ menu.
4Select ‘Binding’ with the 
or 
key.
5Press the 
key to enter the ‘Binding’ menu.
6Select ‘Off’, ‘On’ or ‘Reinforce’.
Note: to clean the reinforcement knives see page 172.
▼Set the binding edge value
1Press the
2Select ‘Folding’ with the 
or 
key.
3Press the 
key to enter the ‘Folding’ menu.
4Select ‘Binding edge’ with the 
or 
key.
5Press the 
key to enter the ‘Binding edge’ menu.
6If you selected ‘On’ in the ‘Select the binding method’ procedure, enter a range between 15 - 30 mm in steps of 1 mm; default 20 mm.
▼Set the folded package length
1Press the
2Select ‘Folding’ with the 
or 
key.
3Press the 
key to enter the ‘Folding’ menu.
4Select ‘Package’ with the 
or 
key.
5Press the 
key to enter the ‘Package’ menu.
6Select ‘Length’ with the 
or 
key.
7Press the 
key to enter the ‘Length’ menu.
Enter a range between 276 - 310 mm in steps of 1 mm; default 297 mm.
198 | Océ TDS400 User Manual |
