[11] Insert the original

The original will be transported about 1 centimetre to a defined position.

2Specify the number of copies with the ‘+’ or ‘-’ keys.

3Press the ‘media’ key to select a roll or to select ‘manual feed’.

4Press the ‘input’ key to specify how a job is sorted: ‘sheet’ (output 1-1, 2-2, 3-3, or ‘set’ (output 1-2-3, 1-2-3).

5Press the ‘zoom’ key to specify a reduction or an enlargement factor, if needed.

6Press the ‘exposure’ key to correct for a lighter or darker original, if needed.

7Press the ‘strip’ key to add or remove a strip, if needed.

8Press the green Start key to start the copy job. The original is fed into the scanner. The printer starts.

9Collect your output.

If you make a copy within the time-out of 1 minute, the machine will use the settings of the previous copy job.

Number of copies

To have multiple copies from one original, enter the number of copies on the scanner operator panel. The original is scanned just once and the required number of copies are processed.

Refer to ‘Product specifications Océ TDS400’ on page 209 for the limitation of multiple copy jobs.

Using the Océ TDS400 to Copy

55

Page 55
Image 55
IBM TDS400 user manual Number of copies