- 39 -

Getting
Ready Taking
Photographs Playing
Back Images Other
Applications Additional
Information
Erasing
Images Handy
Functions

Turning the Power ON

Make sure that the SmartMedia™ is correctly loaded. ( Page 32)
Set the Power switch to [ON].
When the camera is turned ON, set the mode dial to the desired
mode. In the photography modes ([ ], [ ], [ ] or [ ]),
the lens extends from the camera body. Remove the lens cap during
photography. When the camera is turned ON, the Auto Power OFF
function starts to work.
The default setting for the language display for this camera is
English. To match the language in your Instruction Manual with the
language in the camera, change the language display in the LCD
monitor. (Page 113)
IMPORTANT
If no operation is carried out for a fixed amount of time (default: about 1 minute), the power is turned
OFF to prevent battery wear. This is called “Auto Power OFF”. To return to the normal state, either
change the mode dial or press the shutter down half way ( Page 41).
About the Auto Power OFF Function Additional Information, “AUTO POWER OFF (page 114)”

Turning the Power OFF

Set the Power switch to [OFF].
This turns the power OFF.
Attach the lens cap when you are not using the camera.
Turning the Power ON/OFF