Appendix A Site Planning Guidelines
Preliminary Site Survey
Table | Sample Routing System Preliminary Site Survey (continued) |
Preliminary Site Survey
Power
Is DC or AC power available for each chassis? Is there a connection point on the panel for each chassis?
Is a fuse access panel (FAP) available for the equipment? Provide a connection point on the FAP for each chassis.
Will an FAP be installed in time for the routing system installation? Provide a date when the FAP will be installed.
Is the FAP located in the same room as the chassis?
Is there an AC power outlet (220 V or 110 V) located within 10 feet of each chassis, for PCs and test equipment?
Has proper grounding been provided for the equipment? If not, when will the grounding be available? Provide a connection point for the grounding.
Are there any restrictions about when the equipment can be powered on or when electrical work can be done? If so, describe them.
Are there special requirements for power or power cables (for example, a different gauge of wire)? If so, describe them.
Air Conditioning
Does the site have the air conditioning capacity to handle the routing system? If not, note what will be done to rectify the lack of adequate cooling.
Describe the air conditioning at the site.
Control Plane and Alarm Interfaces
Will the chassis be connected to an external alarm system? Has the cabling been considered?
Cisco
|
| ||
|
|
