Chapter 4 Site Planning Considerations

Power and Cooling Requirements

Power and Cooling Requirements

See Chapter 2, “Power and Cooling,” for information about the power and cooling systems on the 8-slot chassis and for information about the power and cooling requirements at the installation site.

System Console

A system console is required to configure the routing system for operation. As you plan your site facilities, make sure that the site has enough room for a system console and the console cable is long enough to reach the routing system.

Note The console port does not support modem control or hardware flow control. The port requires a straight-through EIA/TIA-232 cable.

Cable Management

As the size of the routing system increases, the cabling required for the chassis increases. For example, a fully loaded 8-slot line card chassis has more cables connected to it than a partially loaded chassis. The cabling runs must be carefully planned. The basic configurations for various routing systems should be arranged to minimize the complexity and length of the cable runs. Precut and terminated cables are considered part of the basic configuration.

CONSOLE or AUX RJ-45 RS-232 serial ports on the route processor cards for terminal connections

Ethernet ports on the route processor cards for connecting network management equipment

Modular service cards (MSCs) and physical layer interface modules (PLIMs) for data connections

The cable-management bracket is for organizing these interface cables to keep the front of the chassis clear and to eliminate sharp bends in the cables.

Caution Excessive bending can damage interface cables.

The cable-management bracket has a special telescoping feature that allows the bracket to be extended when the chassis is upgraded with higher-density cards. This extension feature also helps in installing the cables in the chassis.

Figure 4-3shows the chassis cable-management bracket.

Cisco CRS-1 Carrier Routing System 8-Slot Line Card Chassis Site Planning Guide

4-6

OL-5802-06

 

 

Page 38
Image 38
Cisco Systems CRS-1 manual Power and Cooling Requirements, System Console, Cable Management

CRS-1 specifications

Cisco Systems' Carrier Routing System (CRS-1) is a cutting-edge, high-capacity router designed to meet the demands of service providers and large enterprises. Introduced in the early 2000s, the CRS-1 represents a significant leap forward in routing technology, offering unparalleled performance, scalability, and reliability.

One of the primary features of the CRS-1 is its exceptional scalability. The system is built on a modular architecture that allows for easy upgrades and expansions. This enables service providers to start with a configuration that suits their immediate needs while having the flexibility to expand as traffic demands grow. The CRS-1 supports a wide range of line cards, enabling data, voice, and video to be managed on a single platform, which simplifies network management and reduces operating costs.

The CRS-1 leverages advanced technologies that enable it to deliver impressive performance. With the ability to handle up to 92 terabits per second of throughput, the router is capable of supporting a vast number of connections, making it well-suited for large-scale service providers and data centers. This level of performance is powered by Cisco’s proprietary silicon technology, which optimizes the packet forwarding process and enhances overall efficiency.

Another key characteristic of the CRS-1 is its strong focus on reliability and redundancy. The system is designed with high availability in mind, ensuring that it can continue to operate seamlessly even in the event of hardware failures. Redundant components, such as power supplies and route processors, allow the CRS-1 to maintain its performance and uptime, a critical requirement for mission-critical network operations.

Additionally, the CRS-1 supports a wide variety of protocols and technologies, including Internet Protocol (IP), Multiprotocol Label Switching (MPLS), and various service provider features. This versatility makes it a compelling choice for organizations looking to implement advanced networking capabilities, such as Quality of Service (QoS) and traffic engineering.

In summary, the Cisco Systems CRS-1 stands out as a formidable solution for modern routing needs. Its modular design, exceptional scalability, robust performance, reliability, and support for multiple protocols and services make it an ideal choice for service providers and enterprises seeking to future-proof their networks. As the demand for bandwidth continues to surge, the CRS-1 remains a pivotal component in the evolution of networking infrastructure.