Preparing the Battery (continued)

Battery Wear

When the power is ON, the remaining battery power is displayed on the LCD monitor and the status display.

LCD Monitor

Status Display

Remaining Battery Power

 

 

 

Sufficient battery power

Half battery power or less

Little battery power left (Power is cut.)

Either recharge, or replace with a new battery.

No indication

 

No battery power left (Power does not turn ON.)

Blinks twice

Either charge, or replace with a new battery.

 

 

 

Memo

When you use the camera for the first time or if you have left the camera for a long time without the battery loaded, set the date (Page 115).

The battery can be charged in about 70 mimutes if the battery charger (sold separately) is used.

The following shows the approximate number of images that can be photographed continuously using a fully charged battery (PDR-BT2) in room temperature with the flash used for half of the images. Note, however, that these figures vary according to the operating temperature of the camera and the detail of the image being photographed, or length of time viewing the images in play mode.

The number of photographs you can take is reduced when battery (PDR-BT1) is used. With the LCD monitor on: Approx. 110 images

With the LCD monitor off: Approx. 165 images

-29 -

Ready

Getting

Photographs

Taking

Back Images

Playing

Images

Erasing

Functions

Handy

Applications

Other

Information

Additional

Page 31
Image 31
Toshiba PDR-M70 instruction manual Battery Wear, Blinks twice Either charge, or replace with a new battery