Manual feed

There are two possibilities to select manual feed:

via remote control commands added to the print file (by means of Plot Director or drivers).

choose ‘manual feed’ on the scanner operator panel.

[7] Manual feed

If you want to use manual feed, you must:

1program the media settings (material and feed time out) on the printer

2send the file

3feed the sheet of material

4hold the material until the printer pulls in the first part of the material.

If you select manual feed, the printer will inform you to feed the sheet into the printer. There is a time out between 1 and 10 minutes. Default is 1 minute.

Set the time-out for manual feed

Default is 1 minute.

1Press On-line to put the printer off-line.

2Select the ‘Media settings’ item with the or key.

3Press Next/select to enter the ‘Media settings’ menu.

4 Select ‘Manual feed’ with the

or

key.

5Press Next/select to enter the ‘Manual feed’ menu.

6Select the ‘Time out’ with the or key.

7Press Next/select to enter the ‘Time out’ menu.

8Select the desired time out with the or key.

9Press Next/select to confirm the selected time-out.

10Press On-line to put the printer on-line again.

Using the Océ TDS400 to Print

31

Page 31
Image 31
IBM TDS400 user manual Manual feed