Select the input mode

You can use the ‘Input’ setting to indicate how a job is sorted: the ‘sheet’ option prepares each sheet as a separate job (see Figure 12).

Select ‘set’ to keep the copies together and to prevent the interruption with a print job. ‘set’ makes a copy for each sheet in a set and continues with the next copy of the complete set (see Figure 12).

:

Print 3 copies of a 3 - page document

 

page 3

 

page 3

 

page 3

 

page 2

 

page 3

 

page 1

 

page 2

 

page 3

 

page 2

 

page 2

 

page 2

 

page 1

 

page 1

 

page 3

 

page 1

 

page 2

 

page 1

 

page 1

Output with the input mode ‘sheet’

Output with the input mode ‘set’.

[12] Difference between the ‘sheet’ option and the ‘set’ option

Select the input mode

1Press the ‘input’ key to select the input mode ‘sheet’ or ‘set’. The selected indicator lights.

To copy sets

Use the input mode ‘set’ to copy sets of originals. The originals will be scanned sheet by sheet and the image information will be stored in memory. When you press the Start key to close the set the printer prints the output.

How to copy sets

1Press the ‘input’ key to select the input mode ‘set’.

2Insert an original.

3Add the originals to the set and press the Start key .

4After the last scan of the set, remove the original and press the Start key to close the set.

Using the Océ TDS400 to Copy

57

Page 57
Image 57
IBM TDS400 user manual Select the input mode, To copy sets