IBM TDS400 user manual Enter the System menu

▼Enter the System menu

1 Press arrow left ( ).

2 Press the Stop key.

3 Press arrow right ( ).

4 Press the Stop key.

5 Press arrow left ( ).

6 You can now enter the System menu.

▼Set use DHCP server

1Press the On-line key to put the printer off-line.

2Select the ‘System’ item with the or key.

3Press Next/select to enter the ‘System’ menu.

4Select ‘Network sett.’ with the or key.

5Enter password.

6Press Next/select to enter the ‘Network sett.’ menu.

7Select ‘adapter 1’ or ‘adapter 2’with the or key

8Press Next/select to enter the ‘adapter 1’ or ‘adapter 2’ menu

9Select ‘Use DHCP server.’ with the or key.

10Select ‘Yes’ or ‘No’ with the or key.

11Press Next/select to confirm.

12Press On-line to put the printer on-line again.

▼Set the IP address

1Press the On-line key to put the printer off-line.

2Select the ‘System’ item with the or key.

3Press Next/select to enter the ‘System’ menu.

4Enter password.

5Select ‘Network sett.’ with the or key.

6Press Next/select to enter the ‘Network sett.’ menu.

7Select ‘adapter 1’ or ‘adapter 2’with the or key

8Press Next/select to enter the ‘adapter 1’ or ‘adapter 2’ menu

9Select ‘IP address’ with the or key The first three digits flash.

10Enter the first three numbers of the ‘IP address’ with the or key.

11Press Next/select to confirm, the next digits flash.

12Enter the next three numbers of the ‘IP address’ with the or key.

13Press Next/select to confirm, the next digits flash.

14Enter the next numbers of the ‘IP address’ with the or key.

15Press Next/select to confirm, the next digits flash.

16Enter the next numbers of the ‘IP address’ with the or key.

17Press Next/select to confirm.

18Press On-line to put the printer on-line again.

Using the Océ TDS400 to Print 39