Clean the glass platen and the reference roller of the scanner
If the glass platen of the scanner is dirty or static, it should be cleaned to ensure top quality copies are produced. At the same time you can clean the white reference roller.
Attention: When you clean the reference roller, be careful not to damage the sensors on the scanner
▼How to clean the glass platen and reference roller
1 Switch off the scanner.
2Unlock the top cover by pushing the front side of the cover down and pulling it towards.
[71] Open the top cover of the scanner
3Raise the cover (see Figure 72 on page 163).
4Clean the glass platen and the white pressure platen gently with a soft cloth moistened with a small quantity “Cleaner A”.
For safety information see the safety data sheet in Appendix B.
162 | Océ TDS400 User Manual |
