Euro-Pro SC507H Using the Trigger Lock, Using the Variable Steam Feature, Flexible Steam Hose

If the angle adapter is not attached to the steam pocket frame, attach as follows: Hold the steam pocket frame in one hand and the

angle adapter in the other. Insert the angle adapter stem into the opening of the

steam pocketFig. 7 frame as shown in

Fig. 7. Note that the flat on the nozzle must face toward the side of the frame with the brass pin. Once inserted, rotate it 90° Insert the electrical power cord into the outlet. Heating time is approximately 8-10 minutes with cold water. Filling the steam generator with hot water will shorten the heat up time.

Fig. 10

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Using the Trigger Lock

The steam cleaner has a steam trigger lock. The steam trigger will lock when you have pushed it all the way in.

(Fig. 3)To unlock the steam trigger, just press it in the other direction. If you want to have continuous steam,

Locking Button

Hand Grip

3. Bring the velcro strips

that are on the

back side of the

steam pocket towel

over the steam pocket

frame and attach to

the inside of the

• Air dry the towel. Do not put in a clothes

dryer as high heat will cause the towel to

shrink and the microfibers to break down.

• If you wash your towel on a regular basis

and don’t let them get too dirty, they will

last much longer. As with any fabric, dirt

depress the steam trigger and then push in the steam trigger lock.

Fig. 5

Fig. 6

front side of the steam pocket towel.

particles, grease and other contaminants

can cause the fibers to break down,

Fig. 3

WARNING: This appliance is under pressure. After every use, unplug the unit and press the steam trigger button until all pressure has been released before removing safety cap. Allow unit to cool for fifteen (15) minutes before refilling.

Using the Variable Steam Feature

Your steam cleaner has a variable steam feature that allows you to adjust the steam flow to the job that you are doing. The variable steam control is located on the handgrip. To increase the steam flow, turn the knob counter clockwise and to decrease, turn it clockwise. (Fig. 4)

Fig. 4

Using Your Steam Cleaner with Steam Pocket

Step 1: Connect one of the extension tubes to the hand grip on the flexible steam hose. To attach the extension tubes one onto the other or onto the hand grip, press the locking button ensuring that it fits into the hole. (Fig. 5, Fig. 6) To disconnect, repeat the operation by pressing the locking button and pulling the two sections apart.

NOTE: Fit the steam pocket frame with the angle adapter onto the extension tube.

Step 2.

Step 3.

Attaching the Steam Pocket Towel to the Frame

WARNING: Always insure the unit is “UNPLUGGED” from the wall receptacle prior to attaching or removing accessories.

1.Slide the steam pocket towel over the steam pocket frame. (Fig. 8)

Fig. 8

2.Bring the towel all the way to the top of the steam pocket frame. (Fig. 9)

Fig. 9

(Fig. 10)

NOTE: When replacing the steam pocket towel, make sure that the steam pocket frame has been allowed to cool before removing or attaching a new steam pocket towel.

Care & Maintenance of the Steam Pocket Towel

Due to the unique cleaning ability of this cloth, proper care of your microfiber towel is required to ensure long life and continued cleaning ability.

•The first thing you should do when you get a new microfiber towel is to wash and dry it. During the manufacturing process the fabric has a tendency to become flat as it picks up contaminants from the air and machinery. There will also be a number of loose threads that, while they cause no harm, can be annoying the first time you use the towel.

•To clean the towel, simply wash it in your washing machine using the warm water setting.

•Always wash your towels separately from other fabrics. They have a tendency to pick up lint and other particles from other fabrics and the next time you use your towel, this lint will transfer to the surface being cleaned.

•ONLY USE LIQUID DETERGENTS, never use dry detergents as many times the granules do not fully dissolve and become trapped in the towel. This can scratch the surface that you are cleaning.

•NEVER USE BLEACH OR FABRIC SOFTENERS! Bleach will damage the microfiber fabric and fabric softeners deposit a coating on the microfiber fabric that will not allow the cloth to clean efficiently.

therefore regular cleaning will help

preserve your microfiber towels.

• As you use the microfiber towel, you will

notice that sometimes a thread will loosen

or pull out. This is normal and you should

NEVER PULL AT THE LOOSE THREAD!

Pulling the thread can cause the weave to

come undone. Instead, simply trim the

thread with a pair of sharp scissors.

Attaching the Accessories to the

Flexible Steam Hose

Allow the unit to cool for 15 minutes

before changing accessories.

Window Squeegee

This attachment is very useful for

cleaning large windows, plastic material,

ceramic, tiled or marble surfaces.

IMPORTANT: When cleaning

windows, always avoid any sudden

changes in temperature to prevent glass

breakage or cracks.

To use: Connect the tile

squeegee to the hand

grip or use with

extension tube for

hard to reach surfaces.

Apply steam abundantly, rub with the

soft spongy edge, then remove excess

water and dirt with the glass wiping

edge.

Concentrator

Attach the concentrator to the handgrip or to the extension tubes.

Nylon Bristle Brush (x2)

It is best for cleaning grout in-between the ceramic and marble tiles.

To use: Attach the nylon bristle brush on to the end of the concentrator, which then may be used directly

on the hand grip or with extension tubes.

6

7