OcéPower Logic®: System ControlPanel 117
Scanner:to hide or to show the statusof the scanner.
Controller: to hide or to show the status of the c ontroller.
Memory:to hide or to show the amount of set memory that is used.
Note:If operator inventionis requiredfor a device, the respectivekey flashes.
ThePrinter status w indow D isplays the current status of the Print er.Any erro r
messagesdisp layed on the printer control panel also appea r int he printer status
window of the Océ System Control Panel.
TheMedia display Providesgraphi cal information about the status oftherolls
and sheetfeeders (available, empty or disabled) of theprinter and about the
availablemedia (size and type).
Note:If the Media type equals polyester,the thicknessis expressed in mil
(0.001"), otherwise the weight is expressed in g/m2.
Whena roll or tray is disabled the roll icon is dimmed and the media
information is replaced by the text “-disa bled-” (see ‘Icons’ on page 118).
Note:Specia lm edia areexcl uded fromthe aut omatic behavior of the Océ
PowerLogic® Controller.
TheScanner s tatus display D isplays the current status of the scanner.Any
error messages displayed on the scanner controlpanel will also appear inthe
scanner status window of the Océ System ControlPanel.
These t memory meter Indicateshow much of the set memory is filled.The
informationis displayed in the form of a meter which is divided into three
zones:
■Green: safe, you have enough space left to print large jobs/many small j obs
■Orange: pay attention, you might reach the set memory limit soon
■Red:the set memory is (nearly) full; you should remove filesor wait until
filesare printed and automatically removed or flushed from memory.No
moreprint jobs are accepted. Copyjobs can still be made.
Note:At the r ight of the set memory meter a percentage is displayed,
indicatingthe amount of set memorycurrently being used.
Below the Océ System Control Panel main window is displayed: