Alpine CDA-9853R, CDA-9855R 18

18-EN

Adjusting and Storing the Parametric

Equalizer Curve

You can modify the Equalizer settings to create a response curve more

appealing to your personal taste.

To adjust the parametric equalizer curve, set the EQ mode to PEQ.

For details, refer to “Setting User's EQ mode” (page 17).

1Press and hold MENU for at least 2 seconds.

2Select the Parametric EQ (User’s EQ) mode by

sliding your finger on the GlideTouch bar to the

left or right. Press the GlideTouch bar under the

Parametric EQ (User’s EQ) mode.

3Press BAND to select the band to be adjusted.

BAND1 → BAND2 → BAND3 → BAND4 → BAND5 → BAND1

4Select the frequency by sliding your finger on the

GlideTouch bar to the left or right.

Adjustable frequency bands:

20Hz to 20kHz (in 1/3 octave steps)

5Adjust the level by turning the Rotary encoder.

Adjustable level: -6 to + 6 dB

6Press SOURCE/POWER to set the band width (Q).

Adjustable band width: 1.0, 1.5, 3.0

7To adjust another band, repeat steps 3 to 6 and

adjust all bands.

8When the setting has been completed, press

FUNC. or the GlideTouch bar to activate the

preset mode.

9Select any one of the preset numbers (1 through 6)

by sliding your finger on the GlideTouch bar to

the left or right. Press and hold the GlideTouch

bar under the desired preset for at least 2 seconds

to store the adjusted contents.

10After setting, press and hold MENU for at least 2

seconds to return to normal mode.

•The frequencies of adjacent bands cannot be adjusted within 4 steps.

• This function is inoperable when DEFEAT is set to ON (page 17).

• If MENU is pressed while adjusting or setting items in the MENU

mode, the unit will return to the previous selection screen.

•By pressing the GlideTouch bar under RETURN in the MENU

mode, the unit returns to the normal mode.

•If no operation is performed for 60 seconds, the unit returns to

normal mode.

Adjusting and Storing the Graphic Equalizer

Curve

You can modify the equalizer settings to create a response curve to

your personal taste. To adjust the graphic equalizer curve, set the EQ

mode to GEQ. For details, refer to “Setting User's EQ mode” (page

17).

1Press and hold MENU for at least 2 seconds.

2Select the Graphic EQ (User’s EQ) mode by sliding

your finger on the GlideTouch bar to the left or

right. Press the GlideTouch bar under the

Graphic EQ (User’s EQ) mode.

3Press BAND to select the band to be adjusted.

BAND1 → BAND2 → BAND3 → BAND4 → BAND5 → BAND6

→ BAND7 →BAND1

4Adjust the level by turning the Rotary encoder.

Adjustable output level: -6 to + 6 dB

5To adjust another band, repeat steps 3 and 4, then