Alpine CDA-9855R, CDA-9853R 43-EN, Amplifier Link / Vehicle Display Interface Connector

1Amplifier Link / Vehicle Display Interface Connector

Outputs Amplifier Link / Vehicle Display Interface control signals.

Amplifier Link:Connect this to an external Amplifier Link compatible amplifier, using the (also separately sold) Amplifier Link box KCE-511M.

Vehicle Display Interface:Connect this to the optional Vehicle Display Interface box.

•Use the optional splitter cable to connect to both Amplifier Link box KCE-511M and Vehicle Display Interface box.

•For details about connections, consult your nearest ALPINE dealer.

2Antenna Receptacle

3Audio Interrupt In Lead (Pink/Black)

Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received.

4Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

5Dimmer Lead (Orange)

This lead may be connected to the light switch of the vehicle. This will enable the switched on vehicle's light to dim the backlighting of the unit.

6Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.

7Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

8Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

•This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc.

9Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's battery.

!ISO Power Supply Connector

"ISO Connector (Speaker Output)

#Left Rear (+) Speaker Output Lead (Green)

$Left Rear (–) Speaker Output Lead (Green/Black)

%Left Front (+) Speaker Output Lead (White)

&Left Front (–) Speaker Output Lead (White/Black)

(Right Front (–) Speaker Output Lead (Grey/Black)

)Right Front (+) Speaker Output Lead (Grey)

~Right Rear (–) Speaker Output Lead (Violet/Black)

+Right Rear (+) Speaker Output Lead (Violet)

,Ai-NET Connector

Connect this to the output or input connector of other product (CD changer, Equalizer, iPod adapter,*2 etc.) equipped with Ai-NET.

*2 If you connect to the iPod, you need the optional adapter (KCA-420i). For details on connection, refer to the Owner's Manual of the KCA-420i.

-Steering Remote Control Interface Connector

To steering remote control interface box.

.Fuse Holder (10A)

/Rear Output RCA Connectors

RED is right and WHITE is left.

:Front Output RCA Connectors

RED is right and WHITE is left.

;Subwoofer Output RCA Connectors

RED is right and WHITE is left.

<Setting the 3WAY/2WAY switch

Set the 3way/2way Switch according to your audio system.

=System Switch

When connecting a processor using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

•Be sure to turn the power off to the unit before changing the switch position.

>Power Supply Connector

?Ai-NET Cable (Included with CD Changer)

@RCA Extension Cable (Sold Separately)

[DC/DC Converter (CDA-9855R only).

•Do not install the converter at a location subjected to water such as under the floor mat or air conditioner. This may cause a malfunction.

•Do not bundle the DC/DC converter cable with other audio cables. Doing so may induce noise into your system.

•Keep the DC/DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be generated when receiving radio broadcast.

\ISO/JASO Antenna Adaptor (Sold Separately)

An ISO/JASO antenna adapter may be required, depending on the vehicle.

Continued

43-EN