▼Select standard cut
1Press the Extra key.
2Select ‘Paper copy’ with the 
or 
key.
3Press 
key, to enter the ‘Paper copy’ menu.
4Select ‘cut length’ with the 
or 
key.
5Press 
key, to enter the ‘cut length’ menu.
6Select a standard paper format with the 
or 
key.
7Press the ‘confirm’ key.
Adjust the leading or the trailing strip
To increase the copy length to accommodate for a filing strip select a positive leading or trailing strip.
If you do not want the filing strip to show on the copy, select a negative leading or trailing strip. The adjustment steps are indicated on the operator panel, expressed in millimetres or 0.1 inches.
▼Adjust the leading or the trailing strip
1Press the ‘strip’ key to toggle between ‘leading’ and ‘trailing’ strip.
2Select a positive or negative value in steps of 10 mm with the 
or 
key.
3Select a positive or negative value in steps of 1 mm with the 
or 
key.
The length of the selected strip is shown in the display. If the adjustment differs from the default setting, the indication lights.
Attention: If you make the strip larger than the strip on the original, you can lose information.
Using the Océ TDS400 to Copy | 65 |
