▼Improve the copy quality according to the type of image
1 Press the Extra key.
2 Select ‘Original type’ with the 
or 
key.
3 Press the 
key to enter the ‘Original type’ menu.
4Select ‘Lines/text’, ‘Blueprint’ or ‘Photo’ with the 
or 
key.
5Press the 
key to enter the ‘Lines/text’, ‘Blueprint’ or ‘Photo’ menu.
6Select the needed original type.
7Press the confirm key.
Deliver originals after scanning
You can choose for delivery of the original at the front (rewind) or the rear side of the scanner. Use the output at the rear side of the scanner if your originals are:
■thick
■very thin
■damaged
■in a carrier sheet.
The rewind setting will return to default when,
■the ‘cancel’ key is pressed,
■the panel time out has exceeded.
▼Enable the rewind function
1Press the Extra key.
2Select ‘Scanner’ with the 
or 
key.
3Press the 
key, to enter the ‘Scanner’ menu.
4Select ‘Rewind original’ with the 
or 
key.
5Press the 
key, to enter the ‘Rewind original’ menu.
6Select ‘on’ or ‘off’ with the 
or 
key.
7Press the ‘confirm’ key.
Enable automatic feed of the original
To increase the productivity enable Automatic feed, no need to press the Start key, except for the first original. If you disable automatic feed you must press the Start key.
60 | Océ TDS400 User Manual |
