Belt unit
A belt unit offers a large capacity and more flexibility. On the belt unit up to 75 A0 prints can be delivered offset stacked. You can adjust the side guides of the belt, depending on the width of the folded package.
▼Set the belt as folded output delivery
1Press the
2Select ‘Folding’ with the or key.
3Press the key to enter the ‘Folding’ menu.
4Select ‘Delivery’ with the or key.
5Press the key to enter the ‘Delivery’ menu.
6Select ‘Belt’.
▼Adjusting the side guides of the belt
1Loosen the nuts (see Figure 124).
[124] Adjusting the side guides of the belt
2Adjust the plate in accordance with the width of the fold package.
3Tighten the nuts.
The folder | 203 |