IBM TDS400 user manual Create a network destination with SMB

[20] ‘Destination properties’ window

3Enter a logical name for the destination in the ‘Name’ text box. This logical name also appears on the scanner panel S.

4Select the ‘On the controller’ type from the ‘Type’ drop-down list box.

5Enter a path of the target folder in the ‘Path’ text box. You can also click the ‘Browse’ button to select the path.

Note: This is only possible if you select ‘On the controller’ as ‘Type’ (see step 4).

6Click Ok to accept the destination properties.

▼Create a network destination with SMB

1Create a shared folder on a workstation. For example c:\Scan

2On the Océ Scan Manager Open the ‘File’ menu and select ‘New’ or click on the ‘New’ button on the toolbar (see Figure 19).

The Destination Properties dialog box appears (see Figure 20)

3Select SMB from the ‘Type’ drop-down list box.

4Enter the system name of the workstation where you created the shared folder.

Note: Find the system name of the workstation on the control panel of the workstation (Control panel - Network - Identification - System name)

5Enter the path name. This is the name of the shared folder on your workstation. For Windows NT® , Windows® 2000 and XP, use the DOS name of the shared folder.

For Windows 95/98® use the folder name. This is case sensitive.

Note: You can not Browse. Instead of entering the path name by hand, you can use the drop-down list box to select a shared folder available on the selected system.

6If you have set a username and a password for the shared folder on the workstation, then enter the username and the password in the required fields.

Using the Océ TDS400 to Scan-to-file 87