IBM TDS400 user manual User operations

User operations

The Océ System Control Panel allows you to perform the following operations:

■Make a demo print

■Print your system configuration

■Clear the system

■Shut down the system

▼Make a demo print

1Select the Demo print option in the System menu. A demo print is made on the printer.

▼Print your system configuration

1Select the Print settings option in the System menu.

A list is printed of the current settings on the Océ Power Logic® Controller.

▼Clear the system

1Select the Clear system option in the System menu to delete all jobs.

You can use this option in case of a corrupt job which can not be deleted with the help of the Océ Queue Manager.

Note: This option is only available in repro operator, key operator and system administrator mode. In anonymous user mode it is not possible to clear the system.

▼Clear the system on printer panel

1Press the ‘on-line’ key to put the printer off-line.

2Select the ‘System’ item with the or key.

3Press ‘next/select’ to enter the ‘System’ menu.

4Select ‘Clear setmem’ with the or key.

5Enter password

6Press ‘next/select’ to enter the ‘Clear setmem’ menu.

7Select the ‘on’ or ‘off’ with the or key.

8Press ‘on-line’ to put the printer on-line again.

▼Shut down the system

1Select the Shut down option in the System menu to shut down the system.

Note: This option is only available in repro operator, key operator and system administrator mode. In anonymous user mode it is not possible to shut down the system.

Océ Power Logic®: System Control Panel 119