Carrier Access Access Navigator EOC Warning Alarm Message and Trouble Clearing Procedure, Switch

Alarm Clearing

Clear Alarms – EOC

Table 14-7 EOC Warning Alarm Message and Trouble Clearing Procedure

Event Message	Description	Trouble Clearing Procedure
Alarm Count List	Event Report Service Problem.	The alarm is cleared after all
Change	(Reported only if the alarm count	events reportable to the switch
	list has been created. The alarm	have been cleared.
	count list is created by DMS
	switches.)
	The number of alarms active in the
	Access Navigator has changed.
	Only those alarms reportable to
	the switch and excluding Service
	Problems are included in the alarm
	count list.
Analog Line	Event Report Service Problem.	Correct the problem with the
Termination Out of	A previously in-service DS0	incoming DS1 signal, or provision
Service	configured as an analog line	the DS1 as out of service.
	termination has been disabled
	(set ds0 <n:ch> down) or an
	error condition has been detected
	and the DS1 is now out of service.
DS1 Out of Service	Event Report Service Problem	Correct the problem with the
	(Reported only if DS1 type =	incoming DS1 signal, or provision
	SWITCH).	the DS1 as out of service.
	A previously in-service DS1 has
	been disabled (set ds1 <n>
	down) or an error condition has
	been detected and the DS1 is now
	out of service.
System Alarm State	Event Report Service Problem	The alarm is cleared after all
Change	(5ESS only).	events reportable to the switch
	The severity of the system alarm	have been cleared.
	state has changed. Only those
	events reportable to the switch and
	excluding Service Problems are
	included in the system alarm state.

Access Navigator - Release 1.8 August 2003 14-13