Carrier Access Access Navigator user manual Set Remote ID, Set Remote RS232 Baud

CLI Language Reference

CLI Command List

Syntax: set remote config <n> <onoff>

Field

n

on

off

Description

DS1 number, 1 to 32.

Enable automatic provisioning.

Disable automatic provisioning.

Example: set remote config 9 on

Set Remote ID

Purpose: Creates an identifier in the Access Navigator for the remote terminal connected to an Access Navigator drop DS1.

NOTE: Use the show remote command to display the current setting.

Security: Level 2 (operator)

Syntax: set remote <n> id <"name">

Field

n

name

Description

DS1 number, 1 to 32.

A user defined name describing the interface. The name is a text string up to 32 characters long, and may use any combination of letters and numbers. No spaces or special characters are allowed. The name must be enclosed in quote marks.

Example: set remote 9 id "AcmeCorp"

Set Remote RS232 Baud

Purpose: Sets Access Bank II remote RS-232 interface baud rate.

The Access Bank II provides an RS-232 DTE customer interface port for connection to one DS0 channel. This port supports baud rates from 1,200 to 57,600 between two Access Bank II’s and uses a special format to transport asynchronous data over the synchronous DS0 channel.

Security: Level 2 (operator)

18-120 August 2003 Access Navigator - Release 1.8